Stainless-steel fixed-flow regulator (0.5 or 1 LPM) for delivering calibration gas from disposable CAC cylinders to gas detectors.
The CAC FF-100 fixed-flow regulator is the link between a disposable calibration cylinder and the gas detector you need to test. By delivering a steady, pre-set flow it takes the guesswork out of bump testing and span calibration, helping every check run the same way.
Diffusion detectors and pumped instruments draw gas differently, so the FF-100 is offered in 0.5 and 1 litre-per-minute versions to suit the monitor in front of you. The right flow rate delivers gas to the sensor without wastage or false readings.
A stainless-steel body withstands repeated field use and resists the corrosive test gases common in industrial and mining work, making the FF-100 a hard-wearing addition to any calibration kit.
The regulator threads directly onto CAC disposable cylinders. Ask Hinco Instruments in Perth which flow rate suits your detectors, along with pricing and availability.
| Type | Fixed flow regulator |
|---|---|
| Flow Rate | 0.5 LPM or 1.0 LPM (specify at order) |
| Body Material | Stainless steel |
| Inlet Connection | C10 (5/8"-18 UNF) – fits CAC disposable cylinders |
| Outlet Connection | Barbed hose tail for calibration tubing |
| Operation | On-demand fixed flow |
| Compatible Cylinders | CAC 103-series disposable calibration gas cylinders |
| Application | Controlled delivery of calibration gas to detectors |
The CAC FF-100 is a stainless-steel fixed-flow regulator that delivers calibration gas at a constant rate from disposable cylinders:
Hinco Instruments is your authorised CAC specialty gas distributor in Perth, WA. Contact us for pricing, availability, cylinder options, and technical support.
Certified 2.5% volume methane-in-air calibration gas (approx. 50% LEL) – the standard span point for combustible-gas detector calibration.
Download PDF Read more
Certified 100 ppm carbon monoxide calibration gas, balanced in nitrogen, for accurate bump testing and span calibration of CO gas detectors.
Download PDF Read more
Certified 1.0% volume methane-in-air calibration gas (approx. 20% LEL) for low-span verification and bump testing of combustible-gas detectors.
Download PDF Read more